CellarPro 1800XT 220V Manual do Proprietário

9 Alternatively, the front of the cooling unit can be supported by a shelf and a diagonal brace. The shelf can be up to 13.25”(337mm) inches w

10 Ventilation OUTSIDE THE CELLAR Proper ventilation is critically important for the proper operation of your CellarPro cooling unit. The Cel

11the temperature inside the cellar rises above 16.6°C, and turn off when the temperature falls below 14.4°C. In this example, the average temp

12 III. Operating Instructions Overview Please follow the instructions in Chapter I prior to turning on your CellarPro cooling unit. CellarPro

13 Basic Operation The temperature inside the cellar can be increased or decreased by changing the Minimum Set Point as described later in this

14Power On/Off Button Press “Power On/Off” to turn the unit on and off When the “Compressor On” indicator light is on, the Compressor is runnin

15 Energy Saver Button To activate and deactivate the “Energy Saver” mode, press the “Energy Saver” button The “Energy Saver” indicator light w

16 Advanced Operation CellarPro cooling systems can be programmed with advanced settings to achieve more control over conditions inside the cel

17 Standard Protection Mechanisms The cooling unit is programmed to shut down certain components to protect those components, as well as the w

18Alarms The cooling unit has both an audible notification and a visual alarm indicator (shown in “red” on the control panel) that are activate

1 C O N G R A T U L A T I O N S ! Thank you for purchasing a new CellarPro cooling system. Please take a minute to read through this Owner

19 IV. Troubleshooting  The Cooling Unit Runs Constantly The cooling capacity of the cooling unit depends on the thermal load on the wine ce

20 The Cooling Unit Is Dripping The cooling unit is designed to remove excess moisture from inside the cellar, which collects in the drip pan

21  The LA2 Alarm has been triggered As noted above, the cooling unit is designed to measure the temperature of the condenser coils and, if th

22 V. Limited Warranty For two years from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any co

2 [This page left blank]

3 Table of Contents I. Prior to Installation 4 II. Installation Instructions – Wine Cellars 5 III. Operating Instructions 12 IV. Tro

4 I. Prior to Installation  Test the unit before installing it. 1. Remove the unit from the box. SAVE THE BOX AND PACKING MATERIALS. 2.

5 II. Installation Instructions – Wine Cellars  Specifications Model Dimensions (mm) W x D x H Weight (kg) Operating Amps 1800XT 457 x 419

6  Ambient Environment CellarPro cooling units are designed to operate in ambient temperatures between 10.0°C and 29.4°C. They are designed

7 We offer a Wine Cellar Modification for cooling units that will be installed in wine cellars (as opposed to wine cabinets.) The Wine Cellar M

8 Installation CellarPro cooling units are designed to be installed THROUGH THE WALL. A hole should be cut 0.25”(6.4mm) larger than the dimensi